|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
om .c U LCD4Module Technical Specification et he T-51378L025J-FW-P-AB aS at .D w w w O PTREX First Edition Jan 1, 2001 Final Revision ****** Checked by (Quality Assurance Div.) Checked by (Design Engineering Div.) Table of Contents 1. Applications............................................................................................................................................... 2 2. Features...................................................................................................................................................... 2 3. Mechanical Specifications ................................................................................................................. 2 4. Mechanical Drawing of panel........................................................................................................... 3 5. Input / Output Terminals..................................................................................................................... 4 6. Pixel arrangement and input connector pin No .............................................................. 6 7. Absolute Maximum Ratings...............................................................................................................6 8. Electrical Characteristics.....................................................................................................................7 9. Power Sequence.................................................................................................................................. 17 10. Optical Characteristics.................................................................................................................... 17 11. Handing Cautions.............................................................................................................................. 20 12. Reliability................................................................................................................................................ 21 13. Indication of Lot Number Label ................................................................................................... 21 14. Block Diagram ..................................................................................................................................... 22 Revision History Rev. Date m o .c U t4 e e h S ta a .D w w w Page Comment Prepared by (Production Div.) T-51378L025J-FW-P-AB OPTREX CORPORATION om .c 4U et he aS at .D w w w Page 1/22 1. Application This technical specification applies to 2.5" color TFT-LCD panel. The 2.5" color TFT LCD panel is designed for camcorder, digital camera application and other electronic products which require high quality flat panel displays. 2. Features . Compatible with NTSC or PAL system . High Resolution : 112,320 Dots . Optimum Viewing Direction : 6 o'clock . Up/Down and Left/Right Image Reversion 3. Mechanical Specifications Parameter Screen Size Surface Treatment Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Weight Specifications 2.5 (diagonal) Anti-Glare 480x234 50.21x37.67 0.105(W)x0.161(H) Delta 61.6 (W)x49.3 (H)x5.9 (D) TBD3 Unit inch dot mm mm mm g T-51378L025J-FW-P-AB OPTREX CORPORATION Page 2/22 4. Mechanical Drawing of panel: T-51378L025J-FW-P-AB OPTREX CORPORATION Page 3/22 5.Input / Output Terminals Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Symbol STH1 AVSS AVDD VB VG VR VSS VDD CPH1 CPH2 CPH3 STH2 Q2H INH R/L VCOM VCOM XOE CPV U/D DIO2 DIO1 VGL VEE VSS VCC VGH NC I/O I/O I I I I I I I I I I I/O I I I I I I I I I/O I/O I I I I I Description Start pulse for source driver Analog GND for source driver Analog power input for source driver Video Input B Video Input G Video Input R Digital GND Digital power input Sampling and shift clock for source driver Sampling and shift clock for source driver Sampling and shift clock for source driver Start pulse for source driver Video input rotation control Output enable for source driver Left/Right Control for source driver Common electrode voltage Common electrode voltage Output enable for gate driver Clock input for gate driver Up/Down Control for gate driver Vertical start pulse Vertical start pulse Gate off voltage(alternative every 1-H) Gate driver negative voltage GND Logic power for gate driver Gate on voltage No connection Note 5-3 Note 5-7 Note 5-5 Note 5-4 Note 5-6 Note 5-1 Note 5-4 Note 5-1 Note 5-3 Note 5-4 Note 5-2 Remark Note 5-1 Note 5-1 : STH1, STH2 and R/L mode R/L High(VDD) Low(0 Volt.) Note 5-2 : AVDD = +5V (Typ.) Note 5-3 : VDD, VCC = +5Vor+3.3V (Typ.) Note 5-4 : VCOM = 6VPP. STH1 Input Output STH2 Output Input Remark Left to Right Right to Left T-51378L025J-FW-P-AB OPTREX CORPORATION Page 4/22 Phase of the video signal input and VCOM The relation between these values could refer to 8-1 Operating condition. 100% white Composite Video Signal pedestal R,G,B Video Signal V i DC (V R , G , B ) VV Vi AC V COM V COM DC V COM AC V GL V GL DC V GL 1H AC 1H Fig.1 Liquid crystal transmission of the video signal input, VCOM and timing VCOM H Level Video Signal Input Maximum Video Signal Input Minimum Black White L Level White Black White : maximum transmission / Black : minimum transmission Note 5-5DIO1, DIO2 and U/D mode U/D High (VDD) Low (0 Volt.) Note 5-6 : VEE = -15V (Typ.). Note 5-7 : VGH =+15V (Typ.). DIO1 Input Output DIO2 Output Input Remark Down to Up Up to Down T-51378L025J-FW-P-AB OPTREX CORPORATION Page 5/22 6. Pixel Arrangement and input connector pin NO. 1 1 2 3 4 R R B G B G 2 R B R B 3 G R G R 4 B G B G 5 R B R B 6 G R G R 478 B G B G 479 R B R B 480 G G 233 234 R B G R B G R B G R B G R B G R B G 1 28 7. Absolute Maximum Ratings: The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. GND = 0 V Ta = 25 Parameter Symbol MIN. MAX. Unit Remark Supply Voltage for Source Driver Analog AVDD -0.3 +7 V Digital VDD -0.3 +7 Supply Voltage Positive VGH -0.3 +45 V for Gate Driver Negative VGL -23 +0.3 V VGH VGL +15 +40 V Analog input voltage VVideo -0.3 +7.3 V Notes:7-1 Storage Temperature -20 +70 Operation Temperature 0 +60 Notes:7-2 Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Operating Temperature define that contrast, response time, other display optical character are Ta=+25. T-51378L025J-FW-P-AB OPTREX CORPORATION Page 6/22 8. Electrical Characteristics 8-1) Operating Condition Item Symbol VCC VDD AVDD Power Supply VGH VEE VGL AC VGL DC Video Signal (VR, VG, VB) Vi AC Vi DC VCOM AC VCOM VCOM DC H Level L Level VIH VIL +0.9 +0.7 VDD +1.0 +1.1 +0.3 VDD V V V Min. +3.0 +4.5 +4.5 +14.5 -14.5 -11.5 Typ. +3.3 +5.0 +5.0 +15.0 -15.0 +6.0 -12.0 +4.0 +2.5 +6.0 Max. +3.6 +5.5 +5.5 +15.5 -15.5 -12.5 +4.6 Unit V V V V V VP-P V AC Component of VGL DC Component of VGL DC Component AC Component of VCOM DC Component of VCOM Note 8-1 Remark 3.3V Operating 5.0V Operating VP-P AC Component V VP-P Note 8-1 : STH1,STH2,CPH1,CPH2,CPH3,Q2H,INH,CPV,XOE,DIO1,DIO2 8-2)Current Consumption (GND=AVSS=0V) Parameter Current for Driver Symbol IGH IGL ICC,IDD IADD Condition VGH=+15V VGL=-12V VCC,VDD=+5V AVDD=+5V Min. TBD TBD TBD TBD Typ. TBD TBD TBD TBD Max. Unit TBD mA TBD mA TBD mA TBD mA Ta= 25 Remark VGL center voltage 8-3) Backlight driving & Power Consumption Pin No 1 3 Symbol VL1 VL2 Description Input terminal (Hi voltage side) Input terminal (Low voltage side) Remark Note 8-2 Note 8-2 : Low voltage side of backlight inverter connects with Ground of inverter circuits. Power Consumption Parameter LCD Panel Power Consumption Ta= 25 Symbol Conditions TYP. MAX Unit Remark TBD W Note 8-4 T-51378L025J-FW-P-AB OPTREX CORPORATION Page 7/22 8-4) Input / Output Connector A) LCD Module Connector FFC Down Connector, 28 Pins Pitch : 0.5 mm 8-5) Timing Characteristics Of Input Signals Characteristics Symbol 1Field Scanning Period t1V 1Line Scanning Period t1H Source Driver Operating Frequency fhc Signal Sampling Pulse Width tchw Signal Sampling Pulse Delay tchd Signal Sampling Pulse Width(H) tchwh Signal Sampling Pulse Delay(L) tchwl Source Start Signal Pulse Width tshw Source Start Signal Setup Time tshset Source Start Signal Hold Time tshhld Source Output Enable Pulse Width tohw Source Start Signal Rising Time tss Video Input Signal Start Point tvs Phase Difference Between OEH&CPV toc Gate Clock Period tcvw Gate Clock Pulse Width(H) tcvwh Gate Clock Pulse Width(L) tcvwl Gate Start Signal Pulse Width tsvw Gate Start Signal Setup Time tsvset Gate Start Signal Hold Time tsvhld Phase Difference Between OEH&STH tosp Phase Difference Between tohs Gate Output Enable Pulse Width toev VCOM Delay Time tDCOM RGB Delay Time tDRGB Vertical Display Start tsv Min. 1.0 200 95.3 142.9 142.9 90 20 20 1.0 1.5 10 10 10 5 5 5 Typ. 262.5 63.5 3.14 317.7 105.9 158.8 158.8 317.7 158.8 158.8 2.0 9.8 10.0 2.3 63.5 31.7 31.7 63.5 53.2 10.3 4 1.4 2.5 3 Max. Unit Remark H s 5.0 MHz 1000 ns 116.5 ns tchd 12,23 174.7 ns 174.7 ns 630* ns *tshset=tshhld ns ns s s s s s 48 s 48 s 126** s **tsvset=tsvhld s s s s s 3 s 2 s tH T-51378L025J-FW-P-AB OPTREX CORPORATION Page 8/22 HD 8-6) Signal Timing Waveforms VD (22H~256H) 1st display period 2nd display period T-51378L025J-FW-P-AB 5 6 7 19 20 21 22 23 265 266 267 268 269 (285H~519H) Xout t1V=262.5H 2 3 4 282 283 284 285 286 DIO OPTREX CORPORATION tsvw Fig. 8-1 Vertical Start Line for NTSC Page 9/22 HD VD (28H~299H) T-51378L025J-FW-P-AB 1st display period 1 2 3 4 25 26 27 28 29 312 313 314 315 316 2nd display period (339H~611H) Xout t1V=312.5H 624 625 336 337 338 339 340 DIO OPTREX CORPORATION tsvw ** odd field : Scan lines 14n+6 14n+12 (n = 2, 3, 4..) are not displayed. even field : Scan lines 14n+12 14n+20 (n = 2, 3, 4..) are not displayed. Fig. 8-1 Vertical Start Line for PAL Page 10/22 t1H=199 CPHclk=63.5u sec STH1,2 Tshw T-51378L025J-FW-P-AB 198 199 1 2 3 160 161 1 Invalidity data Validity data Invalidity data CPH1 OPTREX CORPORATION R,G,B 197 2 Fig. 8-2 Horizontal Start Pixel Page 11/22 HD tss tshw STH1,2 tosp tohs tohw INH tcvw tcvwh toc tcvwl T-51378L025J-FW-P-AB t DCOM t DRGB tvs CPV toev XOE Q2H V COM OPTREX CORPORATION V R,G,B Page 12/22 Fig. 8-3 Detail Horizontal Timing tchw tchwh tchwl CPH 1 tchd12 CPH 2 tchd23 T-51378L025J-FW-P-AB tshset tshhld tshw R1 (B1) R2 (B2) G1 (R1) B1 (G1) G2 (R2) CPH 3 STH 1,2 OPTREX CORPORATION R3 (B3) B2 (G2) Page 13/22 Fig. 8-4 Sampling Clock Timing tcvw tcvwh tcvwl CPV T-51378L025J-FW-P-AB tsvset tsvhld tsvw DIO 1,2 OPTREX CORPORATION Fig. 8-5 Vertical Shift Clock Timing Page 14/22 Display on panel first line V(R,G,B) ODD FIELD Vertical timing (From up to down) V(R,G,B) EVEN FIELD T-51378L025J-FW-P-AB tsv BRG RGB HD VD DIO2 Q2H OPTREX CORPORATION V COM (Odd field) V COM (Even field) Page 15/22 Fig. 8-6(a) Vertical Timing (From Up to Down) Display on panel first line V(R,G,B) EVEN FIELD Vertical timing (From down to up) V(R,G,B) ODD FIELD T-51378L025J-FW-P-AB tsv BRG RGB HD VD DIO1 Q2H OPTREX CORPORATION V COM (Odd field) V COM (Even field) Page 16/22 Fig. 8-6(b) Vertical Timing (From Down to Up) 9. Power on Sequence(Voltage source) The Power on Sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care. V GH V DD ,VCC V SS (0V) V EE OFF T1 ON T3 Logic signal V COM ,VGL RGB-Video signal OFF T2 T4 1) 10msT1 Condition MIN. TYP. MAX. 45 50 10 15 (to 12 CR10 o'clock) 30 35 (to 6 o'clock) Contrast Ratio CR 110 150 Response time Rise Tr 30 ms =0 Fall Tf 50 ms =0 Reflectance Ratio R TBD % Brightness 170 220 cd/m2 White X 0.250 0.300 0.350 =0 Chromaticity y 0.260 0.310 0.360 Lamp Life Time 10,000 hr +25 Luminance when LCD is White Note 10-1CR Luminance when LCD is Black Contrast Ratio is measured in optimum common electrode voltage. The test configurations of contrast ratio see section 10-2. Horizontal Vertical Parameter Viewing Angle Symbol Ta = 25 Unit Remarks deg deg Note 10-3 deg Note 10-1 Note 10-4 Note 10-2 Note 10-2 T-51378L025J-FW-P-AB OPTREX CORPORATION Page 17/22 Note 10-2 : 1.Topcon BM-7(fast) luminance meter 1field of view is used in the testing (after 20~30 minutes operation). 2.Lamp current : 3 mA 3.Inverter model : TDK-347. Note 10-3 : The definition of viewing angle diagrams : normal ( = 0) observer 3 AB C 12 6 LCD panel 9 : Viewing direction : Viewing angle Note 10-4 : The definitions of response time: White 100% 90% Brightness 10% 0% Tr Tf Black White T-51378L025J-FW-P-AB OPTREX CORPORATION Page 18/22 10-2) Test Configuration BM-7(fast) Caution: 1. Environmental illumination1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input LCD Backlight Pattern generator LCD Display Testing Point Testing Point Pattern A R, G, B Waveform of Pattern A at Testing Point Pattern B RGB waveform Vcom 16ms 16ms Vw=TBDV +/- 0.2V R, G, B Waveform of Pattern B at Testing Point 16ms 16ms RGB waveform Vcom Vb=TBDV +/- 0.2V T-51378L025J-FW-P-AB OPTREX CORPORATION Page 19/22 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 11-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many Hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. T-51378L025J-FW-P-AB OPTREX CORPORATION Page 20/22 12. Reliability No. 1 2 3 4 5 Test Item High Temperature Storage Test Low Temperature Storage Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) Vibration Test (non-operating) Shock Test (non-operating) Electrostatic Discharge Test (non-operating) Ta: ambient temperature [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. 13. Indication of Lot Number Label a) Indicated contents of the label Test Condition Ta = +70 , 240 hrs Ta = -20 , 240 hrs Ta = 0 , 240 hrs Ta = +60 , 95%RH, 240 hrs -25 +25 +70 , 200 Cycles 30 min 5min 30 min Frequency10 ~ 55 HZ Amplitude1.0 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: X, Y, Z Cycle: 3 times 150pF, 330 Air:15KV; Contact: 8KV 10 times/point, 4 points/panel face 6 7 8 Lot number OOO-OOOOOO XXXXXXXXX Internal number Contents of lot number : SB9--STC OEM product 5th--Production year : 19999, 2000A, 20011........ 6th--Production month : 1, 2, 3,....9, A, B, C 7th~10th--Serial numbers : 0001~9999 T-51378L025J-FW-P-AB OPTREX CORPORATION Page 21/22 14. Block Diagram LCD Panel V Driver (Gate) H Driver (Source) 28 PIN Input Inverter Back-light T-51378L025J-FW-P-AB OPTREX CORPORATION Page 22/22 |
Price & Availability of T-51378L025JFWPAB |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |